Lancia Beta Forum
December 27, 2024, 12:18:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Cleaner Warm Intake Hose  (Read 458 times)
0 Members and 1 Guest are viewing this topic.
Rpat29
Newbie
*
Offline Offline

United Kingdom United Kingdom

Posts: 9


« on: November 26, 2024, 03:35:25 PM »

Hi

My Air intake hose is old, torn and come away from the engine. see photos
Can anyone advise on a replacement hose and where to obtain one?
Also, is it okay to still drive with the hose disconnected for short distance to my local garage


* air intake hose 2 engine compartment.jpg (501.37 KB, 2247x1685 - viewed 173 times.)

* air intake hose 3 engine compartment.jpg (480.23 KB, 1685x2247 - viewed 172 times.)

* air intake hose engine compartment.jpg (470.98 KB, 1685x2247 - viewed 175 times.)
Logged
Nigel
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 983



« Reply #1 on: November 26, 2024, 10:33:54 PM »

Hi,
That pipe is to feed warm air to the carb, mostly during colder weather. It is not essential
for engine health nor normal running. My car doesn't even have one, nor did it ever, as it was
delivered to Australia originally.
You can remove it. You won't notice any difference.
However, your air filter container will have a vacuum valve on the side. Just make sure, by looking
into the intake port,( the one from the plastic shroud) that the flap is positioned to allow cool air flow from the
front. That's its default position anyway so all should be good.

If you wish to keep up appearances later, I've seen various aluminium pipes on ebay of suitable diameter.

Nigel
Logged

1984 2.0 Carb HPE [ex Aus] Grigio Finanza.
2007 Mazda 6 2.3 [current daily, highly recommended]
The past:
1980 2.0 HPE White in South Africa [hope it survives!]
1976 1.6 Coupe Lancia Blu [PFG 76R] [probably deceased]
oh,and an Uno Turbo 1997 also in SA [stolen,never recovered]
Kevo
Full Member
***
Offline Offline

England England

Posts: 70



« Reply #2 on: November 27, 2024, 11:23:13 AM »

I think I got my aluminium ducting from Car Builder Solutions.
Logged

1979 Beta Coupe 1600
1972 Triumph TR6 Pi
2005 BMW Z4 Roadster
Rpat29
Newbie
*
Offline Offline

United Kingdom United Kingdom

Posts: 9


« Reply #3 on: November 27, 2024, 04:39:26 PM »

Thanks Nigel. That's really great advice and will check t ensure the valve is in the correct position.
Thanks Kevo on where to get the hose if I need to
Logged
Clifford3051
Full Member
***
Offline Offline

Posts: 64


« Reply #4 on: November 27, 2024, 05:49:10 PM »

Gates do this hose and it's readily available in the UK. Measure the diameter of your current one to make sure it fits.
C
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!