Lancia Beta Forum
November 24, 2024, 10:14:33 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Looking for Lancia Beta parts: www.lanciabetaparts.co.uk
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Guy Croft Beta inlet manifold tapping  (Read 1808 times)
0 Members and 2 Guests are viewing this topic.
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« on: December 22, 2022, 12:58:35 PM »

On my GC Beta inlet manifold (the version that is angled to avoid the block-mounted distributor) there is a tapping on the inlet to cylinder #4. I've tried various bolts and studs I have in my stash and none fit. An M12 bolt of any pitch drops straight through, so I'm guessing it's either M14 (which I don't have) or an Imperial/US size. I've got the verniers on it and the i.d. of the thread as far as I can make out is 12.58mm / 0.495". Does anyone know the correct thread size/pitch? I'm assuming that this is the vacuum takeoff point for the brake servo?
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« Reply #1 on: December 22, 2022, 01:51:58 PM »

On further investigation it looks like it could be M14 x 1.5 - the i.d. of the thread 'sort of' matches and a 1.5 thread pitch guage seems to fit well. If anyone could confirm that would be good, otherwise I think it's off to eBay to buy an M14 x 1.5 allen bolt to try it out.
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1772


« Reply #2 on: December 22, 2022, 03:58:24 PM »

Hi Graham

Take care it could be BSP or BSP Tapered which locks as you increase the engagement. It will be listed in GCs books. Mine are somewhere in a crate not unpacked post move!

Eric
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« Reply #3 on: December 22, 2022, 06:23:37 PM »

Hi Eric,

Yes that's just the kind of thing I'm afraid of. For now I just want to blank it off with a bolt so I can't drop anything down there. Apparently M14 x 1.5 is the size that certain Triumph motorcycles use as a sump oil drain plug, so I've ordered one of them. We shall see...

I've been through all the relevant thread pitch info in my little Zeus book, and as far as I can tell it's not BSF, BSW, BSP, UNF, or UNC, but I'm sure there are plenty of other exotic thread pitches out there it could still be.

Graham
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« Reply #4 on: December 22, 2022, 06:32:11 PM »

Eric,

Your tip about the GC book(s) was spot on - found this on page 114 of Guy's first book:

Graham


* Manifold.JPG (79.14 KB, 691x547 - viewed 336 times.)
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1772


« Reply #5 on: December 23, 2022, 10:12:28 AM »

Hi Graham

I am glad my idea worked.

Happy Christmas

Eric
Logged
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« Reply #6 on: December 23, 2022, 02:04:28 PM »

Hi Eric,

And the same to you and yours,

Graham
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
betabuoy
Hero Member
*****
Offline Offline

United Kingdom United Kingdom

Posts: 319



« Reply #7 on: December 23, 2022, 07:17:47 PM »

… I'm assuming that this is the vacuum takeoff point for the brake servo?

Yes that’s the one.



* 974ACD2A-AE9D-48DA-A14F-7B5DFFF1A416.jpeg (884.78 KB, 2016x1512 - viewed 308 times.)
Logged

1979 Beta Coupe S2FL (1st registered May 1983!)
1967 Morris Minor Traveller
1925 Austin 7 Chummy
mangocrazy
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1366


Graham Stewart


« Reply #8 on: December 23, 2022, 08:47:38 PM »

… I'm assuming that this is the vacuum takeoff point for the brake servo?

Yes that’s the one.



Hi Chris, thanks for the confirmation, much appreciated.

Graham
Logged

1980 Lancia Beta Spider 2000 (S2FL)
2002 VW Transporter T4
2017 KTM Duke 690R
2008 Aprilia SL1000 Falco
1992 Ducati 888 SP3
1988 Honda VFR750F
1980 Yamaha RD350LC
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!