Lancia Beta Forum
November 28, 2024, 08:10:41 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 2024 Events Calendar http://www.betaboyz.myzen.co.uk/forum/index.php?board=92.0
Please feel free to add more.
 
   Home   Help Contact Admin Search Calendar Gallery Articles Login Register  
Pages: [1]
  Print  
Author Topic: Fuel tank issues on series one coupe.  (Read 1926 times)
0 Members and 2 Guests are viewing this topic.
betasulo
Full Member
***
Offline Offline

Posts: 85


« on: December 29, 2019, 05:58:35 AM »

Dear all,

My series one coupe fuel tank tends to over flow out of the fuel filler cap area even with about a quarter tank fuel .This happens when the car has been sitting in the sun for awhile. It is also very difficult to fill up at the pumps as fuel tends to back up if fill up is not done extremely slowly. It is possible the baffles in the fuel tank were removed when it was repaired by a previous owner.
I also don't seem to have any of the venting which the Haynes book shows.

Any advice or suggestions given will be highly appreciated.
Regards
Sulo
Logged
Neil-yaj396
Legendary Member
******
Offline Offline

Posts: 1944


1979 1300 Coupe


« Reply #1 on: December 29, 2019, 09:54:01 AM »

Sounds like a venting issue, I can't see how removing the baffles would cause this. They just stop excessive slosh when cornering.
Logged
WestonE
Legendary Member
******
Offline Offline

United Kingdom United Kingdom

Posts: 1773


« Reply #2 on: December 29, 2019, 12:32:05 PM »

I agree with Neil

This sounds like the vent pipes are blocked or the vent valve has failed or been reversed.

Try sucking through the vent pipe with it removed from the tank. If you can't work back until you find the issue. Sometimes the mud shield is missing behind the arch and the pipe is blocked.

Good luck.

Eric
Logged
betasulo
Full Member
***
Offline Offline

Posts: 85


« Reply #3 on: December 29, 2019, 06:31:40 PM »

Thanks gents,

I will do as you advise.

Regards

Sulo
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
SMFAds for Free Forums
Valid XHTML 1.0! Valid CSS!