With reference to Eric Weston's Guide to molding a Beta...

[droptop]

The flywheel from a Delta turbo is recommended but is it the 1600 or 2000 Delta or are they the same?
Thanks

[smithymc]

My 1985 Delta turbo carb was 1600 and I’m pretty sure the later i.e Turbo was the same.

Mark

[WestonE]

I used the 215mm diameter item from the 1600 and drill the bolts holes out, but as long as you have a clutch that matches no reason not to use a lightened flywheel for an 8V Integrale with a 228mm clutch

Eric

[droptop]

I used the 215mm diameter item from the 1600 and drill the bolts holes out, but as long as you have a clutch that matches no reason not to use a lightened flywheel for an 8V Integrale with a 228mm clutch

Eric

Thanks Eric.
That'll actually be easier to find!