|
Title: Sheet Metal for Fabrication Post by: donaldb7 on December 02, 2022, 04:25:37 PM Hey,
Looking at buying some sheet metal for some of the easier fabrication jobs on the car. Does anyone have any suggestions on a good source/which thickness to buy. I've got some outer sills from Mark that I believe are 1.8mm, would this thickness be suitable for other body panels on the car? Cheers Donald Title: Re: Sheet Metal for Fabrication Post by: HFStuart on December 04, 2022, 07:18:27 AM Too thick for most of it 0.9 to 1.1 is about right.
Title: Re: Sheet Metal for Fabrication Post by: donaldb7 on January 05, 2023, 02:23:53 PM Too thick for most of it 0.9 to 1.1 is about right. Cheers Stuart! |