|
Title: Windscreen Washers Post by: Neil-yaj396 on September 22, 2019, 12:21:09 PM Does anyone know how to remove the 'bridge' that the facelift washers sit on without removing the expansion tank or fuse box? They seem to be fixed with some sort of flexible mounting?
I'm trying to get out my late washer tank to check a blockage.... Title: Re: Windscreen Washers Post by: betaveloce on September 23, 2019, 10:15:58 AM There's a screw in the gutter under the rubber that you see on the right of your photo.
If that's undone, you can just pull the complete 'bridge' out (the bottom part is simply pushed in a small rubber if I recall correctly) ;) Title: Re: Windscreen Washers Post by: Neil-yaj396 on September 24, 2019, 07:21:38 AM Thanks for that. Obviously, the water tank stops you getting to the screw in these later models. I'm guessing you must have to shuffle it to one side, or can the tank be manoeuvred out without removing the bridge?
Title: Re: Windscreen Washers Post by: betaveloce on September 24, 2019, 09:56:23 AM I think I didn't explain well: you just have to pull away the large rubber you see on the photo and then you will see the screw ;)
Title: Re: Windscreen Washers Post by: Neil-yaj396 on September 26, 2019, 08:59:07 AM The screw is in the gutter. Great, thanks.
|