|
Title: With reference to Eric Weston's Guide to molding a Beta... Post by: droptop on June 02, 2018, 07:08:22 PM The flywheel from a Delta turbo is recommended but is it the 1600 or 2000 Delta or are they the same?
Thanks Title: Re: With reference to Eric Weston's Guide to molding a Beta... Post by: smithymc on June 03, 2018, 08:53:36 AM My 1985 Delta turbo carb was 1600 and I’m pretty sure the later i.e Turbo was the same.
Mark Title: Re: With reference to Eric Weston's Guide to molding a Beta... Post by: WestonE on June 03, 2018, 09:19:00 AM I used the 215mm diameter item from the 1600 and drill the bolts holes out, but as long as you have a clutch that matches no reason not to use a lightened flywheel for an 8V Integrale with a 228mm clutch
Eric Title: Re: With reference to Eric Weston's Guide to molding a Beta... Post by: droptop on June 03, 2018, 06:51:40 PM I used the 215mm diameter item from the 1600 and drill the bolts holes out, but as long as you have a clutch that matches no reason not to use a lightened flywheel for an 8V Integrale with a 228mm clutch Eric Thanks Eric. That'll actually be easier to find! |