Lancia Beta Forum

Hi everyone,

My mechanic who had put my spider through "the pits" is not sure if the current rotors will pass. He was checking rotor depths and said if not, I will need to get a set.

Question I have is that, will rotors from a Coupe or HPE fit the Spider? I have been told that they are all compatible (fronts are the same and rears are the same for all), except for the Monte.

Just thought I'll ask as I may come across a set of discs.

Thanks!

Hi

All Beta front rotors are the same, so Coupe/HPE will fit as well

Peter

Hi Peter, the same deal with the rears? All rear rotors are compatible across the Coupe/HPE/Spider?

Yep.

As Stuart says, all the same, so no chance of getting mixed up, the fronts are different to the backs, though appear similar.

There was a member on the Lancisti site who had problems sourcing the rears in the US, but they appear available in Europe, hopefully not a great problem sourcing either for you in Oz?

Also curious if they are called rotors or discs over there?

Peter

I call them discs, but I grew up in the British system. But when I call up asking for parts, they seem to call them rotors.

Thanks for the replies everyone!

do EBC d067 and d068 brake discs fit a coupe 1600?   some sites say they fit others dont

http://www.ebay.ie/itm/EBC-PREMIUM-OE-FRONT-DISCS-D067-FOR-LANCIA-BETA-COUPE-2-1976-85-/111528618592?hash=item19f79faa60:g:se4AAOSw7ThUc~-P (http://www.ebay.ie/itm/EBC-PREMIUM-OE-FRONT-DISCS-D067-FOR-LANCIA-BETA-COUPE-2-1976-85-/111528618592?hash=item19f79faa60:g:se4AAOSw7ThUc~-P)

thanks

As all Betas except the Monte have the same brakes and this ref gives the two p/n, then yes they are the correct parts

https://ebcbrakesdirect.com/automotive/lancia/beta/1.4-1973-1976/6247

I have a set in Australia.. Good nick - PM ME.
BTW- I have loads of parts too!

Just to say I have contacted lots of these ebay companies with Coupe brakes for sale most don't actually have stock.. but you can give them a shout :(
I have also emailed about 6 or 7 manufacturers who use to produce discs but unforantley none are willing to put them back into production.
I have tracked down a few but it does come at a cost...

https://www.bielstein.com/Brake-disc-rear-axle-set-2-pieces-Lancia-Beta (https://www.bielstein.com/Brake-disc-rear-axle-set-2-pieces-Lancia-Beta)

http://autoricambifirat.it/shop/index.php?main_page=product_info&cPath=5_509_516&products_id=12463 (http://autoricambifirat.it/shop/index.php?main_page=product_info&cPath=5_509_516&products_id=12463)

https://www.amazon.it/Brembo-08-2597-10-Disco-Anteriore-dischi/dp/B005O97GNG/ref=au_as_r?_encoding=UTF8&n=1571280031&newVehicle=1&s=automotive&selectVehicleSource=vehicle%20attributes&submodelId=7581 (https://www.amazon.it/Brembo-08-2597-10-Disco-Anteriore-dischi/dp/B005O97GNG/ref=au_as_r?_encoding=UTF8&n=1571280031&newVehicle=1&s=automotive&selectVehicleSource=vehicle%20attributes&submodelId=7581)

Cheers George