|
Title: Bonnet Release Cables Post by: gengis on May 24, 2013, 09:42:43 PM Hi Guy's...I'm puzzled by the bonnet release cables. Just got the Coupe back from the spray shop and the rebuild begins. I was about to re-install the bonnet release mechanism but there seems to be more cable ends than places to put them?
The bulkhead cable goes across to the nearside mech: then there's a second cable from nearside to offside mech:...fair enough...but there's a short intermediate cable (6" long) for the life of me I can't seem to find a home for. Anyone got any ideas or photo's Cheers John. Title: Re: Bonnet Release Cables Post by: Pee Vee on May 25, 2013, 12:44:49 PM Just played this game myself. If I may link to another forum ...
http://www.lancisti.net/forum/showthread.php?7056-Hood-bonnet-latch-picture-wanted (http://www.lancisti.net/forum/showthread.php?7056-Hood-bonnet-latch-picture-wanted) This was the set-up on my car: (http://imageshack.us/a/img849/7696/dsc06357a.jpg) (http://imageshack.us/a/img515/2341/dsc06358b.jpg) (http://imageshack.us/a/img856/2964/dsc06359c.jpg) (http://imageshack.us/a/img208/5149/dsc06360x.jpg) Might be different for RHD but later US cars had a dual release system: one lever on each side. Both levers are attached to one of the latches, in the case of my LHD car, it was the LH latch. Then there is a cable that connects the LH latch to the RH latch. Here is from a friend's early LHD Beta Coupe. I think it only has one release lever. (https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/v/913148_679179922096606_680910837_n.jpg?oh=04e21e460438a1b5dbacb6c8b26405be&oe=51A25DC5&__gda__=1369613120_42c02c56d740854c6df1c525530a764f) Hope that helps! Paul Title: Re: Bonnet Release Cables Post by: gengis on May 25, 2013, 10:53:53 PM Thanks Paul...but my setup is different. See photos. Title: Re: Bonnet Release Cables Post by: Pee Vee on May 26, 2013, 02:46:24 AM Can't imagine what that little cable is for. I don't see that on this old Microfiche but it's from c. 1975
(http://img600.imageshack.us/img600/7866/latch.jpg) I wonder if it has anything to do with these little notches in the sheet metal. The don't appear to have any purpose on my 1981. This is in the cowl area on the bracket that receives the little mushroom-shaped post that is screwed into the bonnet. RH side of the car. There is another one on the other side of this bracket as well. Looks to be about the right size. (http://img198.imageshack.us/img198/7837/dsc06740x.JPG) Title: Re: Bonnet Release Cables Post by: peteracs on May 26, 2013, 08:32:10 AM Gengis, is your system two levers or just one?
Peter Title: Re: Bonnet Release Cables Post by: gengis on May 26, 2013, 10:17:39 PM Thanks Paul...that last photo done it, two cables marshal at that scuttle bracket.
Title: Re: Bonnet Release Cables Post by: Pee Vee on May 27, 2013, 12:28:12 AM Another mystery solved! It was a pleasure to help!
:) |