|
Title: coupe/hpe doors adjusting Post by: lukasdeopalenica on May 07, 2013, 02:27:56 PM Is the striker plate or rather a striker bolt adjustable? I tried to slacken it but failed. I did not forced it. How to make my doors deeper closed to flush the body?
Title: Re: coupe/hpe doors adjusting Post by: Ammy on May 07, 2013, 06:59:48 PM Both the "bolt" and the receiver onthe pillar are adjustable.
Title: Re: coupe/hpe doors adjusting Post by: lukasdeopalenica on May 08, 2013, 08:42:22 AM There is only a bolt as a striker/receiver in my hpe :/
Title: Re: coupe/hpe doors adjusting Post by: Ammy on May 08, 2013, 10:40:54 AM Sorry, got it the wrong way round but H.P.E is oviously different to the Spyder
Title: Re: coupe/hpe doors adjusting Post by: Ammy on May 08, 2013, 10:42:34 AM Pillar photo.
Title: Re: coupe/hpe doors adjusting Post by: lukasdeopalenica on May 09, 2013, 07:39:31 AM Thanks. I meant the pillar striker and only this can be adjusted, what eventually I did.
Title: Re: coupe/hpe doors adjusting Post by: Neil-yaj396 on May 09, 2013, 05:21:54 PM Yes, the bolt like pin on the body can be undone and adjusted. After my OS sill was replaced the door kept popping when I went over a major bump. Moving the pin inwards has largely cured this.
|