|
Title: Absorber for cool rallying application Post by: archigraphe on January 25, 2013, 05:24:34 PM Hi to all...
So I can have 4 spax, nor 4 B6 bilstein, nor 2 Rear KyB and adapted Front.... But I ask you for rallying application with 90 % tarmac , 8% dirt and 2% agricol machine road.... great moment of solitude ::) with no circuit race, which could be the more adapted? Bilstein may be hard, but I don't know Spax....... Title: Re: Absorber for cool rallying application Post by: WestonE on January 25, 2013, 07:54:48 PM I had Gaz make me Gaz Gold Coil over units with adjustable top mounts on the front and re-using the front top mounts on the rear. I have 14 clicks of bump and rebound adjustment a wide choice of springs and I can have the car corner weighted if I wish. Because the springs are smaller I can run wider wheels/ tyres within the arches.
The Spax units are top adjustable so you have some scope to increase the damping to match stiffer springs. Eric |