Lancia Beta Forum

Does anybody has something like this? I have, however, a schematic but for carburetted models with a provision for injection system and separate diagram for the injection system, but I would prefer to have the full and acurate version if it exists of course  8) I have problem with an electrical fuel pump that works when the ignition is on, though it shouldn't. I would be grateful for your help.

I am not sure that they did complete wiring  diagrams for later cars but I will check my stuff. Assuming that the air flow meter is working correctly (pump should only run with air flow meter flap open) I guess that the pump had been rewired incorrectly.

On the S3 cars I thought that there was a separate wiring diagram document that was included with the owners handbook? This addendum was a fold out page with a wiring schematic and I cannot think of any reason other than it was specific to the S3 cars so not worth Lancia updating any manuals, the cheap option being just print it and put it with an existing manual, now I cannot recall whether it covered the ingition but I do remember when I showed it to someone who had a 2000 IE they got very excited and seemed most pleased that I gave it to him.  I know he needed to trace some electrical issues but again I cant recall exactly what the problem was other than the car wasn't running correctly.

I have one of the fold out wiring diagrams, not sure what series it is for but suspect S2FL anyway there doesn't seem to be any reference to the fuel injection, I also have one for the trevi and again no references although one terminal is indicated as 'provision for electric fuel pump'. The L jetronic manual itself splits the wiring into 21 variations of one diagram each marked for a particular diagnostic check. The wiring loom of the injection system is pretty much self contained it only appears to connect to the main loom via connections at the relay on the offside strut tower and another to the ignition coil. 

I do have diagrams for S2FL2 but they are split into several sections, this was the style adopted at around 81/82 onwards presumably because the electrics became more complex but I find them confusing. Unfortunately workshop information on cars after Series two is rather erratic for instance I have never seen a proper book for the Beta volumex  the duplicated/photocopied booklet/service bulletin that Lancar issued seems to be the only one.

I our details for our HPE VX we have a double sided schematic wiring diagram, one side for LH drive, one for right. As with the Trevi diagram mentioned it just shows a "provision for electric fuel pump" connection block. This too does not show the actual pump.
Best,
Chas. :)

Thank you Guys for your reply. It seems that I have "the latest" diagram, it is fold out and printed in ca the A2 format and probably there was no complete schematic just the universal one plus appendixes dedicated for other variants.

Colleagues, could you share the most relevant diagram of 2000i.e. for today?

https://www.dropbox.com/s/pvb2rl6e6b4twrd/Beta%20coupe%20hpe%20series%202%20fl2%20electrics.pdf (https://www.dropbox.com/s/pvb2rl6e6b4twrd/Beta%20coupe%20hpe%20series%202%20fl2%20electrics.pdf)

Not very clear I'm afraid but best I can do without taking too much time

Hi

Not sure if you have looked here, but Lancisti.com have some diagrams in their download section, US centric, but may help?

http://www.lancisti.net/forum/downloads.php?do=cat&id=3 (http://www.lancisti.net/forum/downloads.php?do=cat&id=3)

Peter

Thank you, guys!