|
Title: Andrew's 1300 Coupe project Post by: AndrewJ on November 12, 2012, 10:12:47 AM My project (in Hungary) is running again since this October - after finishing the Pt Cruiser overhaul of my wife ( https://picasaweb.google.com/103220166446302840291/ChryslerPTCruiserProject )
Here is my updated Beta Coupe gallery: https://picasaweb.google.com/103220166446302840291/LanciaBetaCoupe1300RestorationPhotos# Could anyone help me by showing a photo of the original lifiting points? Mine were modified, and I would like to restore the factory style points. Title: Re: Andrew's 1300 Coupe project Post by: VXdeMayo on November 12, 2012, 11:12:53 AM Dear Andrew,
it never ceases to amaze me the lengths people go to in order to restore these great cars! It looks like you have found a few more places that I did not know rusted. This kind of reminds me of the photos I took of my Fiat 128 3P Rally project I had back in the 1990's, same colour, same problems etc. It makes me look like a part time Lancia fan. Best of luck with the rest of it, Chas and Anne. :) Title: Re: Andrew's 1300 Coupe project Post by: cheeky monkey on November 12, 2012, 10:22:57 PM Hi Andrew,
i will take some photos this coming weekend during the day so i can get proper light on the subject (its dark by 4.30pm here now :( and i'm also up very early) .... Not that the originals are good mind. i have the right size bits of wood now to spread the load, as once years ago i lifted the back straight from the jack point and im sure the sill was effected under the weight. Graham Title: Re: Andrew's 1300 Coupe project Post by: AndrewJ on November 13, 2012, 08:29:00 AM Dear Andrew, it never ceases to amaze me the lengths people go to in order to restore these great cars! It looks like you have found a few more places that I did not know rusted. This kind of reminds me of the photos I took of my Fiat 128 3P Rally project I had back in the 1990's, same colour, same problems etc. It makes me look like a part time Lancia fan. Best of luck with the rest of it, Chas and Anne. :) Thanks ;) - car restoration became my main hobby in the last few years. I want to get the Hungarian classic car qualification for my Beta , so I need to work nice. Last month I started also a panel beater course to get official panel beater qualificaton (anyway I am an economist, but I prefer the manual work - that causes much less stress ::)). After my Beta project I would like to continue my new hobby - the next project may be a Fulvia Coupe, Flavia Coupe, Montecarlo or Fiat Dino and later maybe car restoration can be my main job. First I must make references. Title: Re: Andrew's 1300 Coupe project Post by: AndrewJ on November 13, 2012, 08:34:31 AM Hi Andrew, i will take some photos this coming weekend during the day so i can get proper light on the subject (its dark by 4.30pm here now :( and i'm also up very early) .... Not that the originals are good mind. i have the right size bits of wood now to spread the load, as once years ago i lifted the back straight from the jack point and im sure the sill was effected under the weight. Graham Hi Graham, It is very kind of you - I will wait for the photos. I think, that fortunately we have +1 hour of daylight ;) (GMT+1) Maybe I will use a bit thicker iron plate ;) Title: Re: Andrew's 1300 Coupe project Post by: rossocorsa on November 13, 2012, 09:10:31 AM I think that those lifting points are misunderstood someone please correct me if I'm wrong but I thought they were purely there for carrying the body around in production I wouldn't use them to jack a car up. Entirely up to you but I wouldn't worry about them the original style are mini rust traps anyway.
Title: Re: Andrew's 1300 Coupe project Post by: cheeky monkey on November 13, 2012, 05:14:06 PM I think that those lifting points are misunderstood someone please correct me if I'm wrong but I thought they were purely there for carrying the body around in production I wouldn't use them to jack a car up. Entirely up to you but I wouldn't worry about them the original style are mini rust traps anyway. i was changing a flat in a hurry and just put the jack straight under there. i must of missed seeing the slot in the centre of the sill. Been a lot more careful since.! Title: Re: Andrew's 1300 Coupe project Post by: cheeky monkey on November 16, 2012, 04:05:17 PM Hi Andrew
i have just mailed some photos. there might be more than one depending on size of attachment. let me know if you need any others or measurements regards Graham Title: Re: Andrew's 1300 Coupe project Post by: AndrewJ on November 17, 2012, 12:39:22 PM Hi Andrew i have just mailed some photos. there might be more than one depending on size of attachment. let me know if you need any others or measurements regards Graham Hi Thank you for the photos - they are perfect ;)! Title: Re: Andrew's 1300 Coupe project Post by: AndrewJ on July 13, 2013, 09:34:56 PM Hi Beta Boys :)!
Maybe my Beta project seems to be dead, but it runs in the background. I bought a Fiat Punto Cabrio for everyday use in January and I needed to do some work on it: https://picasaweb.google.com/103220166446302840291/PuntoCabrio1216VProject Since May I have been working on my Beta Coupe again - the next project is floorpan and the sills.. https://picasaweb.google.com/103220166446302840291/LanciaBetaCoupe1300RestorationPhotos# |