|
Title: inserts Post by: targa2000 on October 17, 2012, 10:33:49 PM Hello,
please could you advise on which models part no 82301005 is compatible with,I have a pair of new Koni inserts and have no idea what they fit. Many thanks Tim Title: Re: inserts Post by: rossocorsa on October 17, 2012, 11:45:58 PM Just got home bit late now but I will try to check tomorrow night
Title: Re: inserts Post by: targa2000 on October 18, 2012, 05:20:46 AM very much appreciated,Thank you.
Title: Re: inserts Post by: rossocorsa on October 18, 2012, 08:04:08 AM that number is for series 1 berlina front strut assembly
Title: Re: inserts Post by: targa2000 on October 18, 2012, 09:50:54 AM Many thanks for the speedy response,thought it was to good to be true that they'd fit my spider!
Title: Re: inserts Post by: VXdeMayo on October 18, 2012, 12:26:57 PM Does anyone know if these are the same pattern as the HPE shock inserts? I am just about to take mine apart, and Mark from Betaboyz tells me that I have Belina struts on my HPE. If so, does this alter anything like ride height or rebound characteristics etc.
If my old Belina struts are past it I might be interested. Thanks Guys. Best, Chas and Anne. :) Title: Re: inserts Post by: rossocorsa on October 18, 2012, 12:33:49 PM HPE uses coupé/spider struts on front, berlina sized struts on rear. I think that berlina struts would be too tall at the front but I'd have to check the dimensions when at home to confirm.
Title: Re: inserts Post by: MattNoVAT on October 18, 2012, 01:06:20 PM Yes, They would be way too tall for the front - I'll post up a picture of the front and rear inserts for Coupe/HPE/Spider. Will also add dimensions.
Have to attend a meeting but after that... Title: Re: inserts Post by: MattNoVAT on October 18, 2012, 04:30:40 PM Shorter front insert is 320mm x 38mm (the blue body section only)
Longer rear insert is 445mm x 45mm (again the blue body section only) Title: Re: inserts Post by: targa2000 on October 18, 2012, 06:57:54 PM Part number on the Koni box is 82P1925, hopefully someone can confirm which vehicle they fit.
The part number on my first post was given to me by the guy who I bought them from. Title: Re: inserts Post by: targa2000 on October 19, 2012, 02:37:49 PM Got my hands on the inserts today, good news they match the dimensions that Matt listed.
Will be fitting them to the spider along with the new uprated/lowered springs. Title: Re: inserts Post by: MattNoVAT on October 19, 2012, 03:06:18 PM Many thanks for the speedy response,thought it was to good to be true that they'd fit my spider! That must be the front insert for £17.90 on Fleabay???? Title: Re: inserts Post by: targa2000 on October 19, 2012, 07:05:33 PM Matt not that one,whilst working away down in Sidmouth this week I couldnt sleep due to the storm blowing in so went on e-bay at 4 am and there was a buy it now listing for a pair of new Koni inserts, the listing said they were for a coupe but the numbers didnt seem to match up,anyway I took a punt as they were under £50.00 and as luck has it they match the dimensions you listed,thanks for that.
Title: Re: inserts Post by: VXdeMayo on October 23, 2012, 12:38:56 PM Dear Matt,
thanks for the picture of the strut inserts I require. Whilst at Mark's Barn this weekend he kindly helped me out with some front Sachs shocks for my HPE, but I don't know if I can afford some new rear KYB inserts. Do you or anyone else have a pair that will fit my Sachs rear bodies (that Mark says are fine for re-use)? Or failing that a pair of rear shocks complete either NOS or low mileage? All the best, Chas and Anne. :) Title: Re: inserts Post by: MattNoVAT on October 23, 2012, 02:25:06 PM To stop this going off topic can you post your requirement in the Wanted section please? Makes it easier for everyone to find :-)
Cheers Title: Re: inserts Post by: VXdeMayo on October 26, 2012, 04:58:18 PM Please can I make a request for the OE number for a 1984 HPE Volumex rear shock absorber assy. You have informed me that they are the same as the Berlina on the rear, (but the front is the same as the Coupe).
I am trying to track down a pair of replacements and this will be very helpful. Thanks guys. best, Chas. :) Title: Re: inserts Post by: rossocorsa on October 27, 2012, 03:39:47 PM Please can I make a request for the OE number for a 1984 HPE Volumex rear shock absorber assy. You have informed me that they are the same as the Berlina on the rear, (but the front is the same as the Coupe). I am trying to track down a pair of replacements and this will be very helpful. Thanks guys. best, Chas. :) 82395815 this is for S2FL2 HPE they are same dimensions as berlina. I checked the trevi microfiche and trevi rear dampers have the same part number I am not 100% confident on this but sachs part number is probably 110-190 http://www.piecesauto.com/fr/Jeu+de+2+amortisseurs+avant+ou+arriere/SACHS+110190.854.7739.7598.html#montage (http://www.piecesauto.com/fr/Jeu+de+2+amortisseurs+avant+ou+arriere/SACHS+110190.854.7739.7598.html#montage) I found the following cross references on line (which may or may not be right) ALINQUANT: 548010 BILSTEIN: P 36-0093 GABRIEL: 44880 Havam: KS3190 HELLA: A 548 010 Japca: 167399 KONI: 86 W-2118 - 86-2118 - 87 W-2118 - 87-2118 MONROE: MG-946 - MR-946 SACHS: 11 1500 110 190 Title: Re: inserts Post by: VXdeMayo on October 28, 2012, 11:40:02 AM Dear Rossocorsa,
thanks for that info, it was very useful. However I do not recognise the OE number as one that I have been quoted, (A supplier gave me about 7 similar numbers but none that match up: OE Number: 82301005 82346277 82341690 (These poss refer to the front shock and the equivelent KYB number is 365009). OE number: 82287222 82346273 82315779 82341685 (These poss refer to the REAR shock and the equivelent number KYB number is 365010). What do you think? I have checked the Sachs front and rear numbers on my units and the numbers you quote match up. ie: Front HPE: 16 1500 110 191. Rear HPE: 11 1500 110 190. So the final question is which if any of the "OE" numbers quoted to me are correct do I actually need to order? Thanks once again for your assistance. Best, Chas and Anne. ??? Title: Re: inserts Post by: rossocorsa on October 28, 2012, 11:53:29 AM oe that I quoted is for complete sealed strut unit they only supplied complete units on these later series
Title: Re: inserts Post by: rossocorsa on October 28, 2012, 12:45:19 PM Dear Rossocorsa, thanks for that info, it was very useful. However I do not recognise the OE number as one that I have been quoted, (A supplier gave me about 7 similar numbers but none that match up: OE Number: 82301005berlina s1 complete strut front s2 berlina 1.3 front 82346277 superceded part I don't know what it was for! 82341690 s2 berlina front 82327791s2 coupe spider hpe front 82341684s2 coupe spider hpe front I don't know how/why this differs from the one above! 82346272coupe hpe s2FL front 82395527 coupe hpe s2FL2 front (These poss refer to the front shock and the equivelent KYB number is 365009). OE number: 82287222berlina s1 rear s2 berlina 1.3(presumably would fit HPE as well) 82346273 superceded part I don't know what it was for! 82315779berlina s1 rear (presumably would fit HPE as well) 82341685 s2 berlina/hpe 82341688 s2 coupe spider rear 82346274coupe s2FL rear 82346273hpe s2FL rear 82395815 hpe/trevi s2 FL2 rear 82395817coupe s2fl2 rear (These poss refer to the REAR shock and the equivelent number KYB number is 365010). What do you think? I have checked the Sachs front and rear numbers on my units and the numbers you quote match up. ie: Front HPE: 16 1500 110 191. Rear HPE: 11 1500 110 190. So the final question is which if any of the "OE" numbers quoted to me are correct do I actually need to order? Thanks once again for your assistance. Best, Chas and Anne. ??? from S2FL onwards struts were sealed units, very early S1 coupe units appear to have smaller diameter inserts than later cars above part numbers are all for complete struts I've got a bit cross eyed with all these and no time to double check them all so use this list with caution in case of typos or transpositions! no one makes these units any more so it's a case of watching ebay like a hawk Title: Re: inserts Post by: VXdeMayo on October 28, 2012, 04:36:04 PM Dear Rossocorsa, thanks for all that info. At least I will will know what I'm talking about about when I'm getting confused in future! I will let you guys know if I find anything of interset.
best, Chas and Anne. :) Title: Re: inserts Post by: rossocorsa on October 28, 2012, 04:40:32 PM well I wish I knew what I was talking about!! I try my best but it's a minefield of numbers
|