|
Title: Front hub nut size Post by: Thotos on March 02, 2012, 02:17:42 PM I think the front hub nut on the Trevi (possibly all Betas) is 34mm but can someone confirm this or put me right if I'm wrong? :D
Title: Re: Front hub nut size Post by: rossocorsa on March 04, 2012, 11:20:40 AM I thought it was 36 but i couldn't be 100% sure
Title: Re: Front hub nut size Post by: targa2000 on March 04, 2012, 07:17:30 PM 36mm on my 1981 spider.
Title: Re: Front hub nut size Post by: Thotos on March 05, 2012, 01:23:22 AM Thanks guys, 36mm it is then. I know it's not 32 (got one of those) and not 38 (got one of those too) so must be 34 or 36. I thought someone told me it was 34 but probably my memory fails me again, old age you know... :-\
Title: Re: Front hub nut size Post by: HFStuart on March 05, 2012, 07:42:40 PM NB if you get a single hex impact socket the walls are so thick it won't fit through the hole in the disk so you have to take the disk off first.
If you got a bi -hex version you might just be able to undo the nut with the disk in place. |